Ambrose Equipment

2019 ROSCO CSV at www.ambroseequipment.com2019 ROSCO CSV at
2019 ROSCO CSV at www.ambroseequipment.com2019 ROSCO CSV at
2019 ROSCO CSV at www.ambroseequipment.com2019 ROSCO CSV at
2019 ROSCO CSV at www.ambroseequipment.com2019 ROSCO CSV at
2019 ROSCO CSV at www.ambroseequipment.com2019 ROSCO CSV at
2019 ROSCO CSV at www.ambroseequipment.com2019 ROSCO CSV at
2019 ROSCO CSV at www.ambroseequipment.com2019 ROSCO CSV at
2019 ROSCO CSV at www.ambroseequipment.com2019 ROSCO CSV at
2019 ROSCO CSV at www.ambroseequipment.com2019 ROSCO CSV at

For Sale Price:Call


Serving as the most-advanced chip spreader in our product line, the CSV continues our company’s commitment to the preservation industry. The variable width spread hopper and smaller overall footprint provide flexibility that enables chipping within confined areas such as urban routes. Special consideration has been given to the operator’s comfort, safety and visibility making this equipment extremely enjoyable to operate. Given the raw power of this unit, the quality of the finished product remains the same even in areas with rough, steep terrain.

Performance Features:
• Variable Width Spread Hopper, 1’ to 16’ (.304 - 4.8 m)
• No Permit Load, 8’ 6” (2.59 m) Maximum Transport Width
• 275 hp (205 kw) Cummins Tier 4 Final Diesel Engine
• Spreader widths 1’-16’
• Independent operated feed conveyors
• Hydrostatic Front Wheel Drive Propel System
• Reversible Cooling Fan for Cooling System Maintenance
• Application Rate Control, Even While Chipping
• 12” (.304 m) Abrasion Resistant Augers
• 3.5 Cubic Yards (2.6 Cubic Meter) Capacity Material Hopper
• Left Side Full Controls, Right Side Remote Control Station
• Features That Allow For Excellent Clean Out Ability
• Low Maintenance Performance

Job Application:
• Chip spreading
• Surface treatment
• All roads residential to highway
• Driveways


25’ 10” (7.874 m)
8’ 6” (2.59 m)
8’ 8” (2.64 m), beacon retracted
12’ 10.5” (3.92 m)
Turning Radius
26’ (7.92 m) outside turn radius | 22’ 3” (6.78 m) inside turn radius
23,720 lbs (10,759 kg), unloaded | 36,000 lbs (16,329 kg), loaded


65 gallons (246 l)
Hydraulic Reservoir
75 gallons (283 l)

Rear Hopper

3.5 cubic yards (2.67 cubic m) struck
Receiving Width
Maximum 11’ 10” (3.6 m) | Minimum 9’ 6” (2.89 m)
Other Details
Two independent manual flow control gates easily accessible from operator’s station for the conveyors | Skirting in the receiving hopper to minimize spillage

Spread Hopper

1 cubic yards (.764 cubic m) per side
Other Details
0’ to 16’ (0 to 4.87 m) hopper | Individual gate controls that are operated from the control station via electric over hydraulic | 12” (.304 m) augers | Spread roll diameter of 6.625” (168.275 mm), 0.25” (6.35 mm) thick wall | Spread roll maximum speed approximately 150 rpms | Full length rejection screen on the spread hopper, maximum opening of 1” (25.4 mm)


Track Width Front
6’ 3” (1.9 m)
Track Width Rear
6’ 9” (2.05 m)
Tires Standard Size
385/65R 22.5
Budd-disc style

Control Functions

Hydrostatic control system
Manual Mode
Operator can vary forward/reverse speeds of unit with joystick
Speed Ranges
0 to 20 mph (0 to 32.1 kph), high range | 0 to 10 mph (0 to 16 kph), low and reverse ranges


Tier 4 Final | 275 hp (205 kw) Cummings diesel turbocharged engine | Proportional hydraulic fan drive: maximize hp (kw), reduce noise and automatic cleanout | Fuel filter, fuel water separator filter | 12 volt negative ground system | Dual 1000 amp, 12 volt batteries | Dry type dual air cleaner system with indicator | Electrical variable controlled engine throttle
Hydrostatic Pump Drive
Single H1 electric controlled pump | 10.07 cubic in (165,017 cubic mm) rev designed to provide optimum traction for two or four wheel drive system | Hydraulic pump has pressure compensating pump for auxiliary systems
Auxilary Pump System
Capacity to operate the hydraulic gate cylinder, hopper extension, augers, conveyors and spread roll on aggregate hopper | Auxiliary circuits have minimum 500 psi relief setting for the hydraulic gate cylinder | 2,500 psi conveyor
Fan Drive System
45 cc/rev pump to provide optimal flow to the fan drive and steering circuit | 1,325 psi orbital steering
Front Axle
52,900 lbs (23,995 kg) rated capacity, oscillating type | 24.97:1 ratio, wet disc brakes, 5,400 lbs (2,449 kg) application | Powered by 9.82 cubic in (160,921 cubic mm), rev two-speed hydraulic drive motor | Automotive type, drive shaft axle connection between axle and hydraulic drive motor
Rear Axle
Two-wheel drive system | Minimum 22,500 lbs (10,205 kg) rated capacity | 16.5” (.419 m) diameter, 7” (177.8 mm) wide brakes, manual slack adjusters | Drum type brakes, spring applied and hydraulic released | Minimum 7” (177.8 mm) ground clearance
Conveyor Belts
Two independently operated, aggregate feed conveyors | Adjustable tail pulleys with pillow block style bearings, grease zerks for each bearing | Auto and manual system controlled from touch pad system integrated with Plus+1 system | Belt width: 20” (.508 m) | Speed: 0 to 500’ per minute (152.4 m per minute)
Operator Area
One full console on left side, 15” (38.1 cm) slide out platform for optional field of view | Right hand remote operator control | Appropriate foot brake control | Parking brake electronically controlled on main control console | Access to engine and hydraulic components accessible from operator’s deck | Cushioned and adjustable seat
Fully hydraulic, orbital type | Independent of drive system
Two wheel drive: Front axle hydraulic multiple wet disc type | Rear axle hydraulic actuated brakes, spring applied and hydraulic released
Plus+1 CAN Bus control and onboard diagnostic system | DP 710 color graphic display, 7” (177.8 mm), 800 x 480 pixel | Gauges include engine water temperature, engine oil pressure, tachometer, fuel gauge, DEF fluid, voltmeter, hydraulic temperature, hour meter and volt meter
Application Rate Control
Computer monitors the actual speed of the spreader, varies gate opening to maintain the set application rate | Plus+1 CAN Bus system with auto-rate control monitors actual speed of the spreader regardless of load conditions | Programmable application rate in lbs per sq. yard | Include rock size, type, chipping width, feet per minute and accumulative totals | Ability to access memory settings service screens, system faults, engine faults, machine settings, calibration settings and display units in English or metric | Control switches for the working lights, turn/hazard signals and beacon
Additional Standard Equipment
Temperature monitored hydraulic oil cooler | Two wheel drive, front wheel drive | Horn | Backup alarm | LED turn signals, work lights and beacon | Remote camera for hitch | Pressure transducers | Tool and storage box
Optional Equipment
All-wheel drive system | Dual operator consoles with slides | Spread hopper vibrators | Umbrella, quantity 2

General Comments

The technical data contained herein is subject to change due to continuous engineering and development.

Ambrose Equipment

get a quote now!


1401 Hooksett Road Hooksett, NH 03106

Phone: (603) 644-8787 | Fax: (603) 644-8747
Hours: Monday-Friday (7 AM-5 PM)


1 Madison Street Plainville, MA 02762

Phone: (508) 643-0044 | Fax: (508) 643-0034
Hours: Monday-Friday (7 AM-5 PM)

Site Hosted®
© Copyright by Sandhills Publishing Company 2018. All rights reserved. Reproduction of material appearing on this Web site is strictly prohibited without written permission. Machinery Trader and Machinery Trader Marketbook are registered trademarks of Sandhills Publishing Company.

Copyright & Legal Notice   |   Privacy Policy