Ambrose Equipment

2019 LBP RW100B at www.ambroseequipment.com2019 LBP RW100B at www.ambroseequipment.com
2019 LBP RW100B at www.ambroseequipment.com2019 LBP RW100B at www.ambroseequipment.com
2019 LBP RW100B at www.ambroseequipment.com2019 LBP RW100B at www.ambroseequipment.com
2019 LBP RW100B at www.ambroseequipment.com2019 LBP RW100B at www.ambroseequipment.com
2019 LBP RW100B at www.ambroseequipment.com2019 LBP RW100B at www.ambroseequipment.com
2019 LBP RW100B at www.ambroseequipment.com2019 LBP RW100B at www.ambroseequipment.com
2019 LBP RW100B at www.ambroseequipment.com2019 LBP RW100B at www.ambroseequipment.com
All
Photos
Videos

For Sale Price:Call

Description

Engineered with features that keeps the professional in mind, the RW-100B is a self-propelled, wheel-mounted, mid-size shoulder paving machine capable of placing either aggregate or bituminous materials. With a high temperature service belt, this road widener is able to discharge material from the left or right side all controllable from the operator’s console. Front wheel drive allows for better tractive effort while four wheel steering provides better mobility.

Performance Features:
• 110 hp (82.02 kw) Cummings Diesel Engine
• Width of Spread: up to 10’ (3.05 m)
• Contoured Strike-Off
• 21” (.533 m) Wide Heat-Resistant Conveyor Belt
• Belt speed 0-466 FPM
• Hydrostatic drive and traction control system
• 2 Ton (1,814 kg) Hopper Capacity
• Power Adjustable Front Hopper Lip
• Dual Control Stations, Right and Left Sides
• Oscillating Push Rollers
• Unobstructed View from the Operator’s Station

Job Application:
• Placing aggregate for shoulders or road widening to grade and slope up to 10’ wide
• Placing asphalt for shoulders or road widening to grade and slope up to 10’ wide
• Placing drain rock for trench drains on roadsides
• Placing aggregate for utility work back filling

Details

Engine
Tier 3 | 110 hp (82.02 kw) @ 2,200 rpm | Cummins turbo charged diesel | Water-cooled | Battery: 12 volt, 120 amp alternator | Electric start | Fuel reservoir: 68 gallons (257.4 l)
Hopper
Hydraulically adjustable front hopper lip, adjustment range of 7” (177.8 mm) maximum | Two bearing equipped push rollers, truck entry 9’ 3” (2.81 m)
Strike Off
Contoured strike off for controlled spread of material width, depth and slope with minimum side draft and minimum segregation of materials | Basic strike off consist of two 1’ (.304 m) and two 3’ (.91 m) | Raised, lowered, extended and retracted hydraulically with manual stops for fine adjustment of elevation and slope | Outer edger plate assembly included
Conveyor System
Independent, variable speed, hydrostatic, dual end drive system | Two high torque, direct drive hydraulic motors | Conveyor speeds: 0 to 466’ per minute (142 mpm) | Discharge speed controlled with conveyor speed control knob on operator’s console | On/off function controlled with foot switch located at each control station | Conveyor belt: 21” (.533 m) wide, high-temperature service nitrile belt traveling on tapered roller bearing support rollers | Equipped with adjustable wipers to prevent material build-up | Conveyor assembly able to extend and retract up to 4.75” (120 mm) hydraulically | Control the direction of conveyor discharge of material at operator’s console from either side of machine
Brakes
Hydrostatic traction drive primary braking | Parking brake controlled by electric switch on operator’s console | Failsafe parking brake
Tires
•Four 385/65 R 22.5 radial | •Hydro-inflated, pneumatic tires
Optional Equipment
Dual strike off group | 3’ (.91 m) screed strike off with vibration | 6’ (1.82 m) screed strike off with vibration | 3’ to 6’ (.91 to 1.82 m) hydraulic strike off extension, right or left | 2’ (.6 m) crownable strike off attachment | 1’ (.3 m) contoured strike off section | 3’ (.91 m) contoured strike off section | 6’ (.1.82 m) contoured strike off section | 2’ to 3’ (.6 to .91 m) telescoping contoured strike off section | Single grade, sonic, TopCon P-32 system | Single grade and slope, sonic, TopCon P-32 system | Dual grade and slope, TopCon P-32 system | Four-wheel steering | Washdown system with hose reel and 7 gallon (26.4 l) tank | Second operator’s seat | 6.5 kW generator with two 120V AC accessory power outlets | Rear-wheel power assist | Second hose reel kit | Belly mounted broom | Umbrella | Truck hitch
Oscillating Push Rollers
Two bearing equipped push rollers | Mounted on a 9’ 3” (33.83 m) wide oscillating frame | Compensates for minor directional misalignment of truck with widener

Dimensions

Length
25’ 6” (7.77 m)
Width (shipping)
10’ 10” (3.3 m)
Height
8’ 1” (2.46 m)
Wheelbase
14’ 4” (4.36 m)
Total Weight
24,500 lbs (11,113 kg)

Traction Drive

Details
Front wheel hydrostatic planetary drive with electric hydraulic controlled two-speed motor | Independent hydraulic pumps for each planetary drive motor | Pumps are interconnected to synchronize drive system | Infinitely variable throughout both operating ranges | Full reverse in both speed ranges
Low range
@ 1,800 rpm – 0 to 1.8 mph (0 to 2.89 kph) | @ 2,200 rpm – 0 to 2.1 mph (0 to 3.37 kph)
High Range
@ 1,800 rpm – 0 to 7.8 mph (0 to 12.55 kph) | @ 1,800 rpm – 0 to 9.8 mph (0 to 15.77 kph)

Capacities

Fuel Reservoir
68 gallons (257.4 l)
Hydraulic Reservoir
42.5 gallons (160.8 l)

Operator Controls

Dual control stations each equipped with
Direction and speed control lever | Foot actuated conveyor function switch
Control functions on the operator console
Main power | Starter throttle| Horn | Conveyor speed | Shuttle and discharge direction | Strike off lift and lateral movement | Hopper lip position | Steering | Parking brake
Other
Analog gauges for engine oil pressure, water temperature, voltmeter and hydraulic oil temperature, digital tachometer and hour meter | Main power and starter switches, tail light switch and engine governor control located on the lockable engine instrument panel

General Comments

The technical data contained herein is subject to change due to continuous engineering and development.

Ambrose Equipment

get a quote now!

HOOKSETT

1401 Hooksett Road Hooksett, NH 03106

Phone: (603) 644-8787 | Fax: (603) 644-8747
Hours: Monday-Friday (7 AM-5 PM)


PLAINVILLE

1 Madison Street Plainville, MA 02762

Phone: (508) 643-0044 | Fax: (508) 643-0034
Hours: Monday-Friday (7 AM-5 PM)


Site Hosted By...MachineryTrader.com®
© Copyright by Sandhills Publishing Company 2018. All rights reserved. Reproduction of material appearing on this Web site is strictly prohibited without written permission. Machinery Trader and Machinery Trader Marketbook are registered trademarks of Sandhills Publishing Company.

Copyright & Legal Notice   |   Privacy Policy