Ambrose Equipment

2019 LBP G700B at www.ambroseequipment.com2019 LBP G700B at
2019 LBP G700B at www.ambroseequipment.com2019 LBP G700B at
2019 LBP G700B at www.ambroseequipment.com2019 LBP G700B at
2019 LBP G700B at www.ambroseequipment.com2019 LBP G700B at
2019 LBP G700B at www.ambroseequipment.com2019 LBP G700B at
2019 LBP G700B at www.ambroseequipment.com2019 LBP G700B at
2019 LBP G700B at www.ambroseequipment.com2019 LBP G700B at
2019 LBP G700B at www.ambroseequipment.com2019 LBP G700B at
2019 LBP G700B at www.ambroseequipment.com2019 LBP G700B at

For Sale Price:Call


The G700B provides precise performance and ruggedness in a time-tested design. Delivering exceptional 360 degree views and heightened visibility to the cutting edge, while operating this motor grader, you will also notice profound performance marked by ergonomic controls, industry-leading hydraulic responsiveness and electronic gauge package. Featuring ten spool fully adjustable controls, the G700B can be used for various grader operations all while remaining in the comfortable pressurized, heated and cooled cab.

Key Features
• Wheel lean, articulation and twin flow
• Hydraulics and all-wheel drive option
• Scarifier
• Hydrostatic transmission
• Topcon available
• Pressurized, heated and cooled cab option
• 130 hp (97 kw) Cummins Tier 4 Final Diesel Engine
• 11’ (3.35 m) Moldboard
• Moldboard Shifts 3’ (.91 m) left or right
• 2-Speed Tandem Axle
• Tandem Drive
• Electronic Gauge Package
• Fail Safe Braking
• Cushioned, Fully Adjustable Suspension Seat
• Vandalism Protection Package
• Front or Rear Mounted Scarifier Optional

Job Application
• Shaping shoulders, slopes and ditches
• Removing compacted material
• Building pad construction
• Smooth finish grader


Cummins Tier 4 Final diesel engine, water-cooled turbocharged | 130 hp (97 kW) @ 2,200 RPM | Electric start | Two 12 volt batteries, 135 amp alternator
11’ x 21” x 5/8” (3.35 m x .533 m x 15.87 mm) moldboard | Replaceable end bits and cutting edge | Float controls, cuts 1’ 2” (.355 m) below grade with 13” (.33 m) of ground clearance | Tilts 30°, shifts 3’ (.91 m) left or right | 30” (.76 m) in diameter heavy-duty circle | Circle is centered with six adjustable bolts | Circle rotates 64° by two hydraulic cylinders | Circle turn cushion valve protects components from damage | Moldboard height controlled by two hydraulic cylinders mounted to ball joints at turntable | Fully enclosed turntable | Each trunnion mounted to frame by six Excelite bushings
Drawbar: 4” x 6” tube (101 mm x 152 mm)
Articulated Frame
Steel channel, rectangular tubing | Articulated 24° | Pivot 4” (101.6 mm) diameter, supported by 4 tapered roller bearings | Turning radius: 21’ 5” (6.527 m) from center to outside front tire with frame articulated
Turning Radius
22’ (6.71 m) to center of outside front tire with frame articulated
Equipped with six 15 x 19.5, TL, G-2, 8-ply pneumatic tires
Foot operated primary and service brakes | Hydrostatic traction drive system secondary brakes | Control panel switch actuated parking brakes | Spring apply, hydraulic release parking brakes automatically apply when ignition is in “off” position or if system pressure is lost | Pump is de-stroked for secondary braking
Operators Station
Fully cushioned, fully adjustable suspension seat | Vandal protection kit | Choice of ROPS/FOPS cab or ROPS/FOPS canopy | Cab includes air conditioning, heat, front & rear wiper & washer, defroster, and Radio/CD with speakers | Clear, unobstructed view of work area | Two external convex 7.5” (190 mm) diameter side mirrors and single rearview mirror | Color LCD display: coolant temperature, hydraulic oil temperature, fuel level, volt meter, tachometer, hour meter, DEF level, percent engine load, and engine diagnostics
Operators Controls
Industry standard control levers mounted to an adjustable operator’s pedestal controls left and right-hand moldboard lift, front attachment lift, moldboard side shift, circle side shift, moldboard tilt, circle turn, articulation, front wheel lean and rear-mount scarifier control
Rear Hitch
15 ton, heavy-duty, forged rear pintle hitch
Two rear working lights | Two front moldboard lights | Two front headlights, signals, flashers | Two rear tail lights, signals | Amber strobe beacon
Front Axle
Fully welded steel plate design | 40° oscillating axle supported by tapered roller bearings and bushings with wheel lean of 15° left or right (30° total) | Ground clearance: 14” (.355 m) at the center
Optional Equipment
Cold weather engine package | Rear-mounted scarifier, includes 9 ripper shanks with teeth | 8’ (2.43 m) front blade | Front blade mounted flip-down 4 shank scarifier | Front-mounted V-bar scarifier, includes blade float control | 12’ (3.65 m) moldboard | Foot throttle | F-N-R pedal | Dead engine steering | Back-up/reverse camera with in cab color display | Circle side shift


22’ 3” (6.8 m)
7’ 8” (2.33 m)
Height (w/cab and beacon)
10’ 2” (2.9 m)
Wheel Base
16’ 1” (4.9 m)
Front Axle Ground Clearance
14” (.355 m) at the center
Total Weight
16,000 lbs (7,257 kg)


45 gallon (170 l)
Hydraulic Reservoir
30 gallons (114 l)

Traction Drive

Hydrostatic drive using a variable pump that drives a variable motor connected to a 2-speed tandem axle | Variable volume hydrostatic drive system provides infinite speed selection in each of the two speed ranges
Working Range
@ 2,200 RPM 0-10 mph (0-16 kph)
Travel Range
@ 2,200 RPM 0-20 mph (0-32 kph)
Tandems oscillate a minimum of ±15° | Tandem drive, Dana style and gear driven, not chain driven | Optional: All wheel drive

General Comments

The technical data contained herein is subject to change due to continuous engineering and development.

Ambrose Equipment

get a quote now!


1401 Hooksett Road Hooksett, NH 03106

Phone: (603) 644-8787 | Fax: (603) 644-8747
Hours: Monday-Friday (7 AM-5 PM)


1 Madison Street Plainville, MA 02762

Phone: (508) 643-0044 | Fax: (508) 643-0034
Hours: Monday-Friday (7 AM-5 PM)

Site Hosted®
© Copyright by Sandhills Publishing Company 2018. All rights reserved. Reproduction of material appearing on this Web site is strictly prohibited without written permission. Machinery Trader and Machinery Trader Marketbook are registered trademarks of Sandhills Publishing Company.

Copyright & Legal Notice   |   Privacy Policy