Ambrose Equipment

2018 SALSCO TP44TD at www.ambroseequipment.com2018 SALSCO TP44TD at www.ambroseequipment.com
2018 SALSCO TP44TD at www.ambroseequipment.com2018 SALSCO TP44TD at www.ambroseequipment.com
2018 SALSCO TP44TD at www.ambroseequipment.com2018 SALSCO TP44TD at www.ambroseequipment.com
2018 SALSCO TP44TD at www.ambroseequipment.com2018 SALSCO TP44TD at www.ambroseequipment.com
2018 SALSCO TP44TD at www.ambroseequipment.com2018 SALSCO TP44TD at www.ambroseequipment.com
2018 SALSCO TP44TD at www.ambroseequipment.com2018 SALSCO TP44TD at www.ambroseequipment.com
All
Photos
Videos

For Sale Price:Call

Description

Mini-Track Paver, Model TP44 - TD
"The Little Paver That Could"

Model TP44-TD Mini-Track Paver
◦Extra Large Drive Motors for years of Services
◦Designed with Service & Maintenance in Mind
◦Clean Simple Basic Design
◦0 - 6' Standard Paving Width + Screed Extensions up to 7' Wide

Hydraulic Tilt Split Hopper - Extra Large Cut Off Door Inside the Hopper - Hydraulic End-Gates

The TP44-TD, gives you A Lot of Bang for Your Buck and is as versatile as it comes. The TP44-TD Easily Adjusts to Pave Different Widths. The TP44-TD can pave anything from 44" to 6 feet wide, & can even pave widths as narrow as 6" with cut off plates. One convenient detail to note is that The TP44-TD Is Specifically Designed to Drop Into a 48" trench.

Hopper dimensions in the loading position are 38-1/2" Wide x 69-1/2" Long.

Quality of Workmanship, Innovative Design, Built to Last!

The Go-Anywhere Paver! Sidewalks - Cart Paths - Trenches, Etc.

Hydraulic End-Gates move in & out, and have rulers on the top of the end gate to see where they are.

All controls are on the rear of the machine, including the Key Switch & Throttle.

Two (2) 9” Cast Augers are independently operated both Forward & Reverse.

Extra Large Cut Off Door with two (2) Cylinders & Flow Regulators that open the door evenly & smoothly.

Hydraulic Tilt Hopper. Hopper easily bolts together. Raise the complete hopper for ease of maintenance.

Tracks are fixed at 38” to accommodate screed style.

Details

Engine
Hatz 14HP Diesel, Model 1D81Z-9221 Electric Start mounted on 1/2” thick steel plate
Pump
Dual Hydrostatic, Variable Speed. Each section has a displacement of .97 cu. In/Rev
Drive Motors
Qty. 2 Drive Motors for Tracks - 28.7 Cu.In. Displacement. Qty 2 Drive motors for
Hoses
2,500 P.S.I., working, 10,000 P.S.I., burst
Battery
12 volt, automotive type, 850 CCA
Fuel Tank
Steel, 8.9 Gallons Capacity
Hydraulic Tank
Steel, 8 Gallon Capacity
Hopper
Dual hopper, 1/4” thick, steel plate. Inside hopper tilts to 52° angle for ease of dumping
Screed
40” Wide, with Crown/Invert Adjustment, Power End Gates and End Gate Adjustment
Auger Assemblies
(2) 9” Cast Augers, both with independent hydraulic drive, Forward and Reverse
Drive
Hydrostatic; variable forward and reverse
Track Assemblies
Heavy Duty Bridgestone Tracks. Tracks are fixed at 38” to accommodate screed style.
Controls
All controls are located at the rear of the machine over the screed, for ease of operation.
Main Frame
One (1) piece, 1/4” thick steel main frame. 2” x 2” square tubing supports.
Welds
Continuous welds where needed for durability.
Gussets
1/4” gussets where needed for strength.
Bearings
Cast Iron, heavy duty, greaseable.
Chains and Sprockets
#80 chain and sprockets.
Paving Speed
0 - 50’ +, per minute.
Paving Width
24” to 72”.
Paving Thickness
1/4” - 5” Thick.
Guards/Decals
All Moving Parts Guarded. Full Set of Safety Decals.
Paint
Powder coat baked enamel polyester finish; resists ultraviolet light.
Warranty
1-year standard warranty

Dimensions

Length
9’ 4” (with step up)
Width
3’8”
Height
3’ 11” (from the ground to the top of hopper)
Weight
3,060 lbs

Ambrose Equipment

get a quote now!

HOOKSETT

1401 Hooksett Road Hooksett, NH 03106

Phone: (603) 644-8787 | Fax: (603) 644-8747
Hours: Monday-Friday (7 AM-5 PM)


PLAINVILLE

1 Madison Street Plainville, MA 02762

Phone: (508) 643-0044 | Fax: (508) 643-0034
Hours: Monday-Friday (7 AM-5 PM)


Site Hosted By...MachineryTrader.com®
© Copyright by Sandhills Publishing Company 2018. All rights reserved. Reproduction of material appearing on this Web site is strictly prohibited without written permission. Machinery Trader and Machinery Trader Marketbook are registered trademarks of Sandhills Publishing Company.

Copyright & Legal Notice   |   Privacy Policy